DWX-52D 5-Axis Dental Milling Machine

Error Code "103D-0000"

Error Code "103D-0000" Milling data error. The milling bur cannot reach the milling position.

Cause 
The milling bur does not reach the milling position in the Z direction because the milling bur is too short or the angle of the A axis or B axis is too large.

Solution

1. Hold down the operation button on the built-in panel.
   1. This will clear the error.
2. Review the milling bur length and the position of the milling bur holder.
   1. Refer to User Manual P.45 "Step 3: Setting the Milling Bur".
3. Review the CAM settings and decrease the angles of the A axis and B axis.

April 10, 2020