DWX-52D 5-Axis Dental Milling Machine (Wood Crate)

Error Code "102E-0001"

Error Code "102E-0001" The changer has collided with the adapter.

Cause
The changer has collided with the adapter.

Solution

1. Firmly press the adapter into the back of the adapter stocker.
   1. Remove any pieces of cutting waste and foreign objects that have affixed to the adapter stocker.
      1. Refer to User Manual P. 43 "Step 2: Attaching the Adapter to the Machine".
2. This will clear the error or milling will resume.

If the error occurred during milling:
Press the operation button on the built-in panel.
Milling will resume.

If the error occurred while the machine was on standby:
Hold down the operation button on the built-in panel.
This will clear the error.

If the Error Occurs Again

1. Turn off the power.
2. Firmly press the adapter into the back of the adapter stocker.
   1. Remove any pieces of cutting waste and foreign objects that have affixed to the adapter stocker.
      1. Refer to User Manual P. 43 "Step 2: Attaching the Adapter to the Machine".
3. Turn on the power.

April 10, 2020