Article | Roland
Knowledge Base Article

DWX-50 5-Axis Dental Mill

Title
DWX-50 Error Messages
Symptom
​The DWX-50 VPanel Displays an Error Message
Cause

The DWX-50 VPanel can display a variety of different error messages and error codes. Many of them are failsafe mechanisms to protect critical components. The machine will stop operations when any of these failsafe's are triggered.

Solution

​Even though these errors are rare try cycling the power to see if the error is cleared.

If the error repeats, note the frequency and any milling conditions or settings. Contact your Authorized DWX-50 Dealer; provide them with the error code and specific conditions.

Applies To
DWX-50
Modified
July 11, 2014