Article | Roland
  1. Home
  2. Roland DGA Care Service & Support
  3. Dental CAD/CAM
  4. DWX-43W Wet Milling Solution
  5. Article
Support Home      Warranty Registration      Email Support      User Forums
Knowledge Base Article

DWX-43W

Title
101D-01**The X milling bur cannot be released. It might be broken from the root
Summary
X indicates a milling bur stocker number from 1 to 7.
Details
Situation/Error Cause 1
The milling bur may be broken from the base due to use exceeding its service life.
 
Procedure
  1.  Follow the instructions on the VPanel display and remove the milling bur.
  2.  Clean the ATC magazine.
    Cleaning the Milling Bur and the Inside of the Machine (Recommended)
  3.  Perform automatic correction.
    Correcting the Milling Position
Situation/Error Cause 2
The milling conditions may be excessively strict.
 
Procedure
  1.  Follow the instructions on the VPanel display and remove the milling bur.
  2.  Review the CAM settings and the shape specified in the CAD data.
If the Error Occurs Again

The collet may be deformed. In this case, replace the collet.

Replacing the Collet

 

Modified
March 20, 2025
TOP