Article | Roland
Knowledge Base Article

DWX-42W Wet Dental Mill

"102B-0000" The spindle motor temperature is too high
"102B-0000" The spindle motor temperature is too high.
Situation/Error Cause 1
  • The milling bur is worn
  • A workpiece that cannot be milled by the machine is being used
  • The milling conditions are too strict
  1. Turn off the power.
  2. Check the milling bur, the workpiece, and the CAM settings as well as the shape specified in the milling data.
  3. Allow the machine to rest for some time before turning the power on.The motor may have overheated.

Situation/Error Cause 2
  • Milling waste has adhered to the spindle.
  1. Perform spindle run-in (long). "P. 95 "Spindle Run-In (Long)"

If the Error Occurs Again
There is a possibility that the spindle unit is defective. To replace the spindle unit, contact Roland DGA Corporation.
January 01, 1900