DWX-42W Wet Dental Mill (Wood Crate)

"101D-010*" The % milling bur cannot be released. It might be broken from the root.

"101D-010*" The % milling bur cannot be released. It might be broken from the root. The milling bur stocker number (1 to 7) is displayed for %.

Situation/Error Cause

• The milling bur is broken
• The milling bur has exceeded its service life "P. 72 "Replacing Milling Burs"

Procedure

1. Follow the instructions in the VPanel window to open the collet and remove the milling bur.
2. Replace the milling bur with a new one.
3. Perform collet maintenance."P. 44 "Collet Maintenance, Cleaning of Dummy Pin, and Checking of Coolant Flow Rate"
4. Perform automatic correction."P. 56 "Correcting the Milling Machine"

Situation/Error Cause 2

• The milling conditions are too strict.

Procedure

1. Hold down the operation button on the built-in panel.This will clear the error.
2. Review the CAM settings and the shape specified in the CAD data.

If the Error Occurs Again

• The collet is deformed.

Procedure

1. Replace the collet."P. 83 "Replacing the Collet"
2. Perform automatic correction."P. 56 "Correcting the Milling Machine"

April 30, 2020