Knowledge Base Article
DWX-4 4-Axis Dental Milling Machine
Title
DWX-4 lock up, Initializing in Vpanel
Summary
DWX-4 is stuck showing initializing
Details
Symptom
DWX-4 is stuck showing initializing.
Cause
Front door switches not making contact. The switch spring contacts might be bent. This can happen if you bypass the switch and tape it closed. Roland recommends not too defeat these interlocks and aways keep the covers closed during operation.
Solution
Check the door interlock switch springs and contacts.
DWX-4 is stuck showing initializing.
Cause
Front door switches not making contact. The switch spring contacts might be bent. This can happen if you bypass the switch and tape it closed. Roland recommends not too defeat these interlocks and aways keep the covers closed during operation.
Solution
Check the door interlock switch springs and contacts.
Modified
May 12, 2020