Article | Roland
Knowledge Base Article

DWX-4 4-Axis Dental Milling Machine

Title
"1033-000*" The coolant has run out
Summary
"1033-000*" The coolant has run out.
Details
Situation/Error Cause
  • The coolant tank is not filled with the appropriate amount of coolant.
  • The coolant filters or coolant lines are clogged.
Procedure
  1. Fill the coolant tank with the appropriate amount of coolant. "P. 65 "3. Pour in the new coolant."
  2. According to the situation, perform the operations shown below.
    • When the error occurred during milling
      • Press the operation button on the built-in panel. Milling will resume.
    • When the error occurred outside of milling
      • Hold down the operation button on the built-in panel. This will clear the error.

If the Error Occurs Again
Perform the operations shown below
Modified
April 30, 2020