Article | Roland
  1. Home
  2. Roland DGA Care Service & Support
  3. Dental CAD/CAM
  4. DWX-4 4-Axis Compact Dental Mill
  5. Article
Support Home      Warranty Registration      Email Support      User Forums
Knowledge Base Article

DWX-4 4-Axis Dental Milling Machine

Title
"102B-0000" The spindle motor temperature is too high
Summary
"102B-0000" The spindle motor temperature is too high.
Details
Situation/Error Cause 1
  • The milling bur is worn
  • A workpiece that cannot be milled by the machine is being used
  • The milling conditions are too strict
Procedure
  1. Turn off the power.
  2. Check the milling bur, the workpiece, and the CAM settings as well as the shape specified in the milling data.
  3. Allow the machine to rest for some time before turning the power on.The motor may have overheated.


Situation/Error Cause 2
  • Milling waste has adhered to the spindle.
Procedure
  1. Perform spindle run-in (long). "P. 95 "Spindle Run-In (Long)"


If the Error Occurs Again
There is a possibility that the spindle unit is defective. To replace the spindle unit, contact Roland DGA Corporation.
Modified
January 01, 1900
TOP