Knowledge Base Article
CAMM-1 Pro Series GX-400 40" Vinyl Cutter
Title
Media Rises During Cutting
Summary
Material rises up during cutting, causing the blade to scratch the material
Details
Symptom
Material rises up during cutting, causing the blade to scratch the material.
Cause
Material is 30" or wider and a middle pinch roller is not being used
Solution
When cutting materials over 30 inches in width, make sure to lower a pinch roller over the middle grit roller.
Material rises up during cutting, causing the blade to scratch the material.
Cause
Material is 30" or wider and a middle pinch roller is not being used
Solution
When cutting materials over 30 inches in width, make sure to lower a pinch roller over the middle grit roller.
Modified
May 13, 2020