Article | Roland
Knowledge Base Article

CAMM-1 Pro Series GX-300 30" Vinyl Cutter

Title
Cutting issues- cutting too deep into the liner
Symptom
Cutting too deep into the liner, backing material or also called the carrier paper
Cause
​It might be caused by too much blade extension in the blade holder or an unknown blade that does not meet Roland specifications. Too much blade force (too high a gram force) for this material
Solution

​1. Refer to the User Manual- Adjust the amount of blade extension beyond the adjustment cap on the blade holder.

2. Also check for "Detailed Cutting Condition Settings" in Users Manual,  Adjust cut down force and cutting speed.  

Applies To
GX-24, GX-300, GX-400, GX-500, GX-640
Modified
July 03, 2014