Knowledge Base Article
CAMM-1 GS-24 24" Desktop Vinyl Cutter
Title
Setting the Speed of the Blade During Cutting GS-24
Summary
I'm using standard vinyl and would like to increase the cutting speed on select jobs
Details
Question
I'm using standard vinyl and would like to increase the cutting speed on select jobs.
Cause
UPSPEED function will allow you to increase the cutting speeds during the cutting function.
Solution
This setting lets you set the speed for moving the blade to the next cutting
position with the blade lifted off the material during cutting operation.
If set to AUTO, the blade moves at the speed specified by SPEED. If
UPSPEED is increased, the cutting time is shortened. When cutting material
that is thinner or thicker than the standard material, it may be better to decrease
the speed such as to prevent the material from being lifted up.
I'm using standard vinyl and would like to increase the cutting speed on select jobs.
Cause
UPSPEED function will allow you to increase the cutting speeds during the cutting function.
Solution
This setting lets you set the speed for moving the blade to the next cutting
position with the blade lifted off the material during cutting operation.
If set to AUTO, the blade moves at the speed specified by SPEED. If
UPSPEED is increased, the cutting time is shortened. When cutting material
that is thinner or thicker than the standard material, it may be better to decrease
the speed such as to prevent the material from being lifted up.
Setting Range: 10 to 50 cm/s (10 cm/s steps), AUTO
Modified
May 11, 2020