CAMM-1 GR-640 64" Large Format Cutter
1. A heavy load was placed on the motor, and forced the motor error
2. Cutting thick material can cause this error
3. Material was pulled off suddenly from the supply role. No material was feeding forward
4. An overload was placed on the machine due to a material jam or a similar cause
1. Turn off the power, turn on the power, and then load the material again.
2. When cutting thick material, set the quality setting to [HEAVY].
3. Perform the following steps if there is a jam in the material and prohibits the initial operation duing power on.
A. Turn the power off
B. Move the cutting carriage to the right edge of the machine by hand
C. Turn the power on (the pinch rollers automatically raise)
D. Clear the material jam