Article | Roland

SOLJET EJ-640 64" Eco-Solvent Inkjet Printer

Cargo
LEJ-640-Media-thickness-detection
Síntoma
​Unable to detect (setup) thick substrates on the LEJ-640. Example: 0.25 inches or greater in thickness.
Causa

This could be caused by a dirty reflective strip on the platen or a fine adjustment needed by a qualified Dealer Service Engineer

Solución
1. Make sure the reflective strip (chrome tape approximately 1/4 inch wide by the width of platen) is clean and free of any ink build up or smudges
 
2. ​This could also be related to a fine adjustment required on the paper side sensor circuit, please contact your supporting Dealership
Aplica A
LEJ-640
Modificado
June 20, 2014