Base de conocimientos Article
CAMM-1 GS-24 24" Desktop Vinyl Cutter
Cargo
My GS-24 is cutting too deep into the vinyl
Síntoma
The GS-24 is cutting through the backing material and even the cutter pad
Solución
Symptom
The GS-24 is cutting through the backing material and even the cutter pad.
Cause
The contour cutter blade could be adjusted out too far
The cut down force could be set too high for this material
Solution
Start off by checking the extension of the blade in the blade holder. Check your cutting force setting.
For more details refer to these 2 sections (Links) in the GS-24 Users Manual:
The GS-24 is cutting through the backing material and even the cutter pad.
Cause
The contour cutter blade could be adjusted out too far
The cut down force could be set too high for this material
Solution
Start off by checking the extension of the blade in the blade holder. Check your cutting force setting.
For more details refer to these 2 sections (Links) in the GS-24 Users Manual:
Modificado
May 11, 2020