VersaStudio BT-12 Direct-to-Garment Printer

Choosing the best location for the BT-12

To avoid any print quality or environmental issues please read these recommendations.

​To avoid any print quality or environmental issues please read these recommendations.

Note: ​Final results of your finished product all depends on where you place the BT-12 printer.
 

Tips on choosing a location

• Always place the BT-12 and HB-12 on a sturdy, level surface. You can use a carpenter's level on the machine front to back, and side to side to confirm that it is level. Less than 2 degrees tilt.
• Avoid damp areas.
• Make sure the BT-12 is not exposed to extreme temperature changes.
• Avoid placing the BT-12 next to an air conditioner duct or a space heater
• Install in a dust free environment.
• Do not use the BT-12 at a location higher than 8,200 ft (2,500 meters) above sea level.

Operating Temperature and Humidity

• The optimal range is 59°F (15° C) to 77°F (25°C). 15% RH- 70% RH (RH= relative humidity).

April 08, 2020