Article | Roland
  1. Inicio
  2. Servicio y Soporte Roland DGA Care
  3. Impresión e Impresión/Corte
  4. Impresora/Cortadora de Inyección de Tinta Eco-Solvente VersaCAMM VP-300i de 76 cm
  5. Article
Página de Inicio de Soporte      Registro de Garantía      Enviar E-mail a Soporte      Foros de Usuario
Base de conocimientos Article

VersaCAMM VP-300i 30" Eco-Solvent Inkjet Printer/Cutter

Cargo
MOTOR ERROR TURN POWER OFF
Síntoma
MOTOR ERROR TURN POWER OFF
Solución
Symptom
MOTOR ERROR TURN POWER OFF

Cause
​Possible media jam.

Solution
A motor error occurred.

Operation cannot be continued. Switch off the sub power. Next, eliminate the cause of the error, then immediately switch on the sub power. If the machine is allowed to stand with the error uncorrected, the print heads may dry out and become damaged. This error may be caused by such factors as a mistake in loading the media, a media jam, or an operation that pulls the media with excessive force.

The media has jammed.
Carefully remove the jammed media. The print heads may also be damaged. Perform head cleaning, then perform a printing test and check the results.
 
The media was pulled with excessive force.
Excessive tension was applied to the media, and additional action is necessary to recover from this state. First, move the loading lever to the rear and adjust the media to create a small amount of slack, then switch on the sub power.
 
If the error continues, please contact your local Roland Service Center.
Modificado
May 13, 2020
ARRIBA