Article | Roland

TrueVIS SG-540 54" Printer/Cutter

Cargo
Temperature is too high message
Síntoma
The printer display is showing a temperature toohigh warning
Solución
Symptom
The printer display is showing a temperature too high warning

Cause
​This is based on the current room temperature near the printer. The printer has an on board sensor that is reading a temperature above the proper operating range.

Solution
​Turn off the sub power at the control panel. Lower the room temperature to at no higher than 32 degrees C or 90 degrees F.
The operating range is 20 to 32° C or (68 to 90°F).
Modificado
April 09, 2020