Base de conocimientos Article
DWX-52DCi 5-Axis Dental Milling Machine With Automatic Disc Changer
Cargo
Expansion Port
Síntoma
Expansion Port
Solución
IMPORTANT!
Before connecting or disconnecting the cable, be sure to turn off the machine's power. Connecting cables to or disconnecting cables from the milling machine while its power is on may cause malfunctions.
* We are not responsible for devices connected to this port.
Note
• Be sure to use the connector within the rated range shown above.
• Do not apply an additional voltage to the connector.
• Do not short-circuit the connector to ground.
Before connecting or disconnecting the cable, be sure to turn off the machine's power. Connecting cables to or disconnecting cables from the milling machine while its power is on may cause malfunctions.
* We are not responsible for devices connected to this port.
Note
• Be sure to use the connector within the rated range shown above.
• Do not apply an additional voltage to the connector.
• Do not short-circuit the connector to ground.
Modificado
December 15, 2021