DWX-52DCi 5-Axis Dental Milling Machine With Automatic Disc Changer

Error Code "103B-0000"

Error Code "103B-0000" The automatic correction is not yet finished.

Cause #1

• Automatic correction has not been performed.
• Automatic correction was cancelled before it could finish, and the machine was left in the state.
• Automatic correction was not performed after updating the firmware to a version that required automatic correction to be performed again.

Solution

1. Hold down the operation button on the built-in panel.
   1. This will clear the error.
2. Perform automatic correction.
   1. Refer to User Manual P. 65 "Correcting the Milling Machine".

Cause #2
The VPanel and machine firmware versions may not match.

Solution
Download the latest versions of VPanel and the machines' firmware, then install these versions.
www.dgshape.com

April 10, 2020