Base de conocimientos Article
DWX-52D 5-Axis Dental Milling Machine
Cargo
DWX FAQ - DGShape
Síntoma
FAQ's for DWX devices
Solución
DWX FAQ
Q: Where are the machines manufactured?
A: In Japan. DWX-52D is manufactured under Japanese medical device regulations.
Q: Is CAD/CAM software included?
A: Not all regions include software, see an individual DGSHAPE reseller for details.
Q: Why do we need a dust collector?
A: It is to prevent the discharge of the processing waste. Inhalation of processed dust may cause irritation to the respiratory tract. Zirconia dust is very dangerous if inhaled. It also has a role to prevent machining debris from getting inside the main cavity of the machine where the electronics are located.
Q: What kind of dust collector / compressor should I use?
A:
Dust Collector
A: In Japan. DWX-52D is manufactured under Japanese medical device regulations.
Q: Is CAD/CAM software included?
A: Not all regions include software, see an individual DGSHAPE reseller for details.
Q: Why do we need a dust collector?
A: It is to prevent the discharge of the processing waste. Inhalation of processed dust may cause irritation to the respiratory tract. Zirconia dust is very dangerous if inhaled. It also has a role to prevent machining debris from getting inside the main cavity of the machine where the electronics are located.
Q: What kind of dust collector / compressor should I use?
A:
Dust Collector
- Static pressure 4 KPa or more
- Airflow rate 2 m 3 / min or more
Compressor
- Air pressure 0.2 to 1.0 Mpa
- Air volume 30 L / min or more
- Due to the inclusion of foreign matter into the compressed air, please use oil-free type.
- Moist air will cause rust. Please use one with a dryer.
- Since stable pressure is required, please choose one with sufficient tank capacity.
- Hose outer diameter: 6 mm (polyurethane resin tube) please be prepared.
Q: How many teeth can I make with one zirconia disc?
A: It is roughly 20-40 teeth. However it depends on shape and CAM function to be used.
Q: Do I need to use a medical-specific milling burr?
A: You do not need to use medical-grade milling burrs.
Q: Is it possible to operate continuously for 24 hours?
A: We have done durability tests of continuous operation and we have seen no problems. Please be sure to observe the following conditions for the installation environment:
A: It is roughly 20-40 teeth. However it depends on shape and CAM function to be used.
Q: Do I need to use a medical-specific milling burr?
A: You do not need to use medical-grade milling burrs.
Q: Is it possible to operate continuously for 24 hours?
A: We have done durability tests of continuous operation and we have seen no problems. Please be sure to observe the following conditions for the installation environment:
- Operating Environment: Temperature 5 to 40 ° C, humidity 35 to 80% (with no condensation)
- Environmental Pollution Degree: 2 (according to IEC 60664-1)
Q: We are considering purchasing. Where can I inquire about the product?
A: Click "Where to Buy"
To access the DGShape web pages, please click here.
A: Click "Where to Buy"
To access the DGShape web pages, please click here.
Modificado
June 28, 2019