Página de Inicio de Soporte Registro de Garantía Enviar E-mail a Soporte Foros de Usuario

Base de conocimientos Article

DWX-43W Wet Milling Solution

Cargo

101E-****The X milling bur might be broken

Síntoma

X indicates a milling bur stocker number from 1 to 7.

Solución

**Situation/Error Cause 1**
The milling bur is broken. The milling bur holder is out of position.

Procedure

Hold down the operation button on the built-in panel.
This will clear the error.
Check the status of the milling bur.
- When the milling bur is broken
  - Replace the milling bur with a new one.
- When the installation position of the milling bur holder is not appropriate
  - Install the milling bur holder in the correct position.
  - Setting the Milling Bur

**Situation/Error Cause 2**
The milling conditions may be excessively strict.

Procedure

Hold down the operation button on the built-in panel.
This will clear the error.
Review the CAM settings and the shape specified in the CAD data.

**If the Error Occurs Again**
The collet may have worn out and its ability to retain the milling bur may have deteriorated. Replace the collet with a new one. Replacing the Collet

Modificado

March 20, 2025

ARRIBA