CAMM-1 GX-24 24" Vinyl Cutter Knowledge Base Article | Roland DGA

CAMM-1 GX-24 24" Vinyl Cutter

Cargo
GX-24 Motor Error
Síntoma
​My GX-24 shows a motor error on the display
Causa
​A heavy load occured during cutting
Solución
A heavy load was placed on the motor, and the operation stopped. Check the media supply in the back of the cutter to make sure it feeds properly.
Turn off the power, lower the loading lever, and load the material again.

Reference:
Loading the Material
Aplica A
GX-24
Modificado
October 20, 2018