CAMM-1 GX-24 24" Vinyl Cutter Knowledge Base Article | Roland DGA

CAMM-1 GX-24 24" Vinyl Cutter

Cargo
Crop marks cannot be read
Síntoma
​Crop marks cannot be read.
Causa
​Check the following items.
Solución
​• Is the material loaded properly?
Refer to Load the printed material and load the material correctly.

Is the loaded material curled upward?
Straighten out the material before loading.

Does the material have creases or wrinkles?
Crop marks may not be read if the material has creases or wrinkles.

Stretch the creases or wrinkles out and load the material again. If the crop marks still fail to be read, prepare a new material and repeat the operation from Step2: Print the data.

When using CutStudio

When using Illustrator

Are you using a material that is not white or that has decorations?
Crop marks cannot be detected if decorations or colors are on the material.

Crop marks also cannot be detected on glossy or laminated material even if it is white.
Are the crop marks blurred or are they printed using a color other than black?
Set the color of crop marks to black, specify 100% density, and print the data again.
Are the size and shape of crop marks correct?
Make the crop marks perfect circles with 10-mm diameter.

For details, see Printing and Cutting Overview.

Crop marks that are printed using dedicated crop mark generation functions of the software cannot be detected.
Are the crop marks at the correct positions?
Refer to Create the data and place the crop marks at the correct positions.

When using CutStudio

When using Illustrator

Do not expand or reduce the data when printing. If you do, the printed positions of the crop marks will be offset.
Are the settings for the driver correct?
Check the settings according to the following procedure.

  1. From the File menu, click Cutting Setup. Check that the printer name is Roland GX-24, and then click Properties.

  2. Click the Size tab and check that Rotate is set to Off.

    If 90 deg is specified, the GX-24 cannot detect the crop marks.

Are the settings for the GX-24 correct?
Check that the ROTATE menu is set to 0deg. If set to 90deg, set it to 0deg. For the verification and setup procedure see here.

Is direct sunlight or high intensity indoor light hitting the machine?
If direct sunlight or indoor light hits the cutting carriage sensor, crop marks may not be detected.

Move the machine to a location where direct sunlight or indoor light does not hit the machine.

Aplica A
GX-24
Modificado
October 19, 2018