DWX-53D
Checks before Installation
Placement and Installation Work
The weight of the machine alone is 120 kg. Unload and place the machine with care.
CAUTIONUnloading and emplacement are operations that must be performed by 4 persons or more.
Tasks that require undue effort when performed by a small number of persons may result in physical injury. Also, if dropped, such items may cause injury.
CAUTION
When lifting the machine, hold the locations shown in the figure.
IMPORTANT
Do not grasp the milling area cover, adapter area cover, tool area cover, or dust collection hose attachment port when holding the machine.
Installation Site
WARNING
Install the machine in a location that is level, stable, and able to bear the weight of the machine.
The total weight of the machine may reach 120 kg or more. Installation in an unsuitable location may cause a major accident, including tip over, fall, or collapse.
WARNING
Never install in a location exposed to open flame.
Milling waste may ignite. Powdered material is extremely flammable, and even metal material may catch fire.
WARNING
Never install the machine close to any flammable object or in a gas-filled location.
Combustion or explosion could occur.
WARNING
Never install this machine outside or in any location where exposure to water or high humidity may occur.
Current leakage may cause electrical shock or fire.
WARNING
Position the machine so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emergency. Install the machine next to an electrical outlet. Also, provide enough empty space to allow immediate access to the electrical outlet.
- Never install the machine in a location subject to wide fluctuations in temperature or humidity.
- Never install the machine in a location subject to shaking or vibration.
- Never install the machine in a dusty or dirty location.
- Never install the machine in a location exposed to direct sunlight or near air-conditioning or heating equipment.
- Never install the machine in a location exposed to considerable electrical or magnetic noise or other forms of electromagnetic energy.
- Never install this machine in an environment where silicone substances (oil, grease, spray, etc.) are present. Doing so may cause poor switch contact or ionizer damage.
Temperature and Humidity
Install this machine in a location that meets the specified conditions for temperature, humidity, and the like. Failure to do so may result in malfunction.- Temperature: 5 to 40°C (41 to 104°F)
- Humidity: 35 to 80%RH (no condensation)
IMPORTANT
Whenever possible, use the machine in an environment with a constant temperature. Large fluctuations in temperature in the installation environment may affect the milling quality.
Installation Space
Ensure that at least the following amount of space is available for the installation.
Installation space | |
Work space | |
A | 800 mm (31.5 in.) |
B | 900 mm (35.43 in.) |
C | 1,800 mm (70.87 in.) |
D | 1,900 mm (74.8 in.) |
Ensure that enough space is available to allow the adapter area cover and tool area cover to be opened.
H | 912 mm (35.91 in.) |
RELATED LINKS
Installation Location Height
The installation location should be above the work floor by 0.6 m (23.6 in.) or more.
This machine is a desktop-type unit. Install the machine in a location that allows easy access to areas such
as the power switch during operation.