DWX-53D
Checking the Included Items
The following items are included with the machine. Make sure they are all present and accounted for.
Power cord, power plug adapter (1 each) |
USB cable (1) |
Regulator (1) Drain hose (1) |
Air hose (1) |
Adapter (6) |
Automatic correction jig (1) |
Pin-type workpiece adapter (1) |
Open edge adapter (1) *1 |
Milling bur positioner (1) |
Milling bur holder (15) |
Detection pin (1) |
Tool rack (1) |
Collet attaching/detaching jig (1) |
T-shaped hexagonal screwdriver (1) |
L-shaped hexagonal wrench (1) |
Brush (1) |
Mounting screws (25) |
Screws (adapter spare; 8) |
Screws (pin-type workpiece adapter spare; 2) |
Black screws (for the regulator; 4)
|
Cloth for care (1) |
Milling burs (4)*2 |
Torque screwdriver*3 | |
Right tablet holder (1) Screw (1) |
Left tablet holder (1) Screw (1) |
Adapter rack (1) |
Cushions (for tablet; 4) |
Adapter ID labels (optional; 1)*4 |
Quick Access Guide (1) |
Safety Precautions (1) |
*1 Affix an (optional) adapter ID label to the adapter base before using this adapter. You can use any adapter ID label number.
*2 ZRB-200D, ZPB-100D, ZPB-50D, and ZPB-30D (1 each)
*3 Handles (2), bits (1.5 mm [0.06 in.], 2.5 mm [0.1 in.], and 3.0 mm [0.12 in.]; 1 each), and sleeves (0.3 N·m, 0.6 N·m; 1 each)
*4 Use these labels when you have purchased optional adapters.
IMPORTANT
When using the torque screwdriver with a sleeve attached, do not loosen screws that have been tightened with a torque greater than or equal to the value on the sleeve. Doing so may damage the sleeve.