Knowledge Base Article
DWX-52DC 5-Axis Dental Milling Machine With Automatic Disc Changer
Title
Error Code "1047-****"
Summary
Error Code "1047-****" The machine's internal memory cannot be accessed.
Details
Cause
It was not possible to write milling data to the internal memory or to read milling data from the internal memory.
Solution
Even if this error occurs, the milling data can be sent. However, do not remove the USB cable while milling is in progress.
If the Error Occurs Again
Clear the [Enable data buffering]. check box, and send the milling data again.
Refer to User Manual P. 13 "Settings Tab".
It was not possible to write milling data to the internal memory or to read milling data from the internal memory.
Solution
- Hold down the operation button on the built-in panel.
- This will clear the error.
- Send the milling data again.
Even if this error occurs, the milling data can be sent. However, do not remove the USB cable while milling is in progress.
If the Error Occurs Again
Clear the [Enable data buffering]. check box, and send the milling data again.
Refer to User Manual P. 13 "Settings Tab".
Modified
April 10, 2020