Knowledge Base Article
CAMM-1 GS-24 24" Desktop Vinyl Cutter
Title
Set To Error GS-24
Summary
Display reads: Set To <Tool Mode> Error GS-24
Details
Symptom
Display reads: Set To <Tool Mode> Error GS-24.
Cause
Crop marks cannot be read when the GS-24 is in Sensor Mode.
Solution
Press any key to clear the error message. Change the machine's settings to Tool Mode, and then resend the data. When doing so, use four crop marks. When the machine is in Tool Mode, it is not possible to cut using three crop marks.
Display reads: Set To <Tool Mode> Error GS-24.
Cause
Crop marks cannot be read when the GS-24 is in Sensor Mode.
Solution
Press any key to clear the error message. Change the machine's settings to Tool Mode, and then resend the data. When doing so, use four crop marks. When the machine is in Tool Mode, it is not possible to cut using three crop marks.
If you want to use three crop marks, leave the machine in Sensor Mode and change the shape and color of the crop marks, or the color and glossiness of the material.
Users Manual Links for addition information on
Modified
May 11, 2020